POSITIONING AND INSTALLATION OF MK3 Positioning To ensure that your pump and MK3 pump do not strain, the system must not be higher than 500mm from the opening of your feeding tanks. System should be out of direct sunlight and rain.
Page 8
Startup off MK3 pump If you have tanks that your bore-hole water flows into first, ensure that the outlet of the tank is connected to the MK3. Make sure that the outlet has a separate intake on the top of your tank.
CLEANING AND MAINTENANCE The MK3 filter system has media that will have to be replaced from time to time. Most of the media has a minimum 3-year span understanding that it is at normal use. There is a 50ppu bag filter for the finer sediment that might get past the first 2 filters.
Need help?
Do you have a question about the MK3 and is the answer not in the manual?
Questions and answers