Reversing The Door Opening - Mistral MWC14R Operating Instructions Manual

Reversing the door opening

This Wine Cellar has the capability of opening the
door from either the left or right side. This unit is
delivered to you with the door opening from the
left side. Should you decide to reverse the opening
direction, please follow these instructions.
5
9
8
1 Door Hinge Cap
2 Door Hinge Screw
3 Upper Door Hinge
4 Lower Door Hinge
5 Plug
6 Short Leg
7 Door Hinge Bolts
8 Leveling Front Leg
9 Hinge Plug (Door Frame)
Note: Ensure that you place all parts removed in
a safe place whilst reversing the door opening.
Reversal of Wine Cellar Door opening
1. Remove the upper hinge cap (1).
1
2. Using a sharp object, pry out the plug buttons (5).
2
3. Remove the two Phillips head screws (2) that
3
connect the upper hinge (3) on the right side of
the cabinet top.
4. Carefully lift the door and place it on a padded
surface to prevent it from scratching.
5. Remove the plug (9) and transfer it to the
uncovered hole at the right side. Be sure to
press the button firmly into the hole.
6. Remove the two bolts (7) that hold the lower
hinge (4) on the right hand side.
4
7. Remove the screw-type levelling front leg (8)
and transfer it to the right as shown in the
6
figure below.
7
8. Set the door into its new place making sure
the pin enters the bushing at the lower frame
section (hole).
9. Secure the upper hinge (3) previously
removed in step 3 on the left side. Make sure
the pin enters the bushing at the upper frame
section (hole).
10. Loosely secure the lower hinge (4) and do not
tighten the bolts until the door is in the closed
position and levelled.
11. Insert the plug buttons (5) on the uncovered
holes (right side).
12. Replace the upper hinge cap (1).
6