Advertisement
•
The cord should neither be lengthened nor
folded into a coil during operation. It is not
recommended that the cord is kept close to
the compressor at the back of the bar fridge,
as the surface temperature is quite high when
operating. Making contact with the two would
de-activate the insulation or cause leakage of
electricity.
•
Put food in the bar fridge after running the bar
fridge for 2-3 hours.
What You Need To Know Before Moving
Or Relocating The Bar fridge
•
Unplug the power cord.
•
Take the food out of the bar fridge.
•
Fasten the interior components with adhesive
tape.
•
Have two people carry the bar fridge to move
safely.
•
Fasten the doors with adhesive tape to prevent
door from opening while moving.
•
When fi xed or moved, the bar fridge can not be
set horizontally or declined more than 45
o
placed upside down.
Cleaning Your Bar fridge
•
Before cleaning the bar fridge, unplug the
power cord. To clean, use a soft cloth. Wash
with warm soapy water, rinse and dry.
•
The bar fridge may smell during the initial
operation, but the odour will fade away when
the bar fridge is cooled suffi ciently.
•
Use a soft cloth for cleaning the interior and
exterior of the bar fridge.
•
Do not sprinkle water directly onto the bar
fridge.
•
Place parts back in their original positions after
cleaning.
Troubleshooting
When the bar fridge does not work:
•
Check if there is a power failure.
•
Check if the power plug is plugged into the
power outlet.
•
Check that the fuse has not blown.
When the bar fridge is cooling
excessively:
•
The thermostat control dial may be set too high.
•
If you place foodstuff containing a lot of
moisture directly under the cool air outlets,
they will freeze easily. This does not indicate a
malfunction.
When the bar fridge is not cooling
suffi ciently:
•
The food may be packed too tightly together
which will block the fl ow of cool air.
•
You may have put something hot or a lot of
foodstuff into the bar fridge .
•
The door may not have been closed properly.
•
The door gaskets may be damaged.
•
The bar fridge may not be ventilated.
or
•
There may be insuffi cient clearance between
the bar fridge and the surfaces immediately
above and beside the fridge.
•
The thermostat control dial may not be set
properly.
When defrosted water overfl ows inside
the bar fridge and onto the fl oor:
•
Check that the drain pipe and the drain hose are
not clogged.
•
Check that the drain pan is housed properly.
When the bar fridge's cabinet front
heats up:
•
In order to safeguard against condensation,
there is an anti-condensation pipe which heats
up the cabinet front when the bar fridge is
on. A warm cabinet front does not indicate a
malfunction.
6
When condensation forms on the
outside of the bar fridge:
•
Condensation may form on the outside when the
humidity is high, such as during a wet season.
This is the same result as the condensation
formed when chilled water is poured into a glass.
It does not, therefore, indicate a malfunction.
Wipe dry with a dry cloth.
When you hear a sound like water
fl owing:
•
A sound like water fl owing is the refrigerant
fl owing. It does not indicate a malfunction.
Technical Specifi cations
Classifi cation of climate
Protective classifi cation of electric shock resistance
Capacity
Rated voltage
Rated input power
Rated frequency
Volume of power consumption
Refrigerant charge volume
Ice making capacity
Net weight
Overall dimensions
PERCENTAGE RUNNING TIME
FOR COMPRESSOR
THERMOSTAT
TEMPERATURE
% RUNNING TIME
1
8.8
4
4.3
8
0.2
When the cabinet's side panel heats up:
•
The side panel of the cabinet will heat up when
the door is opened or closed frequently, when
starting the unit and when the unit operates in
summer with high ambient outside temperature.
In such cases, do not touch the panel. It results
from the dissipation of the heat from inside the
cabinet, and it does not mean that something is
wrong with the bar fridge.
T
1
140 L gross, 110 L net
220 - 240V ~
90W
50Hz
0.52 kWh/24hr
R134a, 70g
0.8kg/24hr
26kg
504 x 490 x 865mm
46.7%
71.7%
100%
7
Advertisement
