INOX EL-PTC-20 Installation Instructions

The EL-PTC-20 provides a safe and effective means of power transfer from a contact plate mounted in an
aluminum tube, hollow metal frame, or wood door to a set of spring-loaded contacts mounted at the top of the
door's vertical stile or hollow metal frame. When the door is closed, they touch and complete. Please read all
Contact Plate
(with removable tab guide)
USAGE:
Frame Installation
Fasteners:
x3 #5 x 5/8" Phillips Flat Head
Sheet Metal Screw
Dimension Information
for Contact Plate & Spring-Loaded Contact Block
GUIDE TAB
3/4 3/4
Bottom of Contact Plate
INSTALLATION INSTRUCTIONS
EL-PTC-20 Power Contact/Transfer
instructions before installing.
EL-PTC-20 POWER TRANSFER COMPONENTS
24V DC or 24V AC maximum
Not recommended for electric latch retraction
Use GUIDE TAB in down position.
Mounting Hole
5/8"
Wire Lead Hole
5/8"
Mounting Hole
1/8"
Power Transfer Device
Spring-Loaded
Contact Block
(With screw)
USAGE:
Door Installation-
Fasteners:
x1 12-24 x 1" Pan-Head
Phillips Machine Screw
Front of block
showing 1/2"
adjustment slot.
Top of block
showing
1-7/16"
mounting
screw.
(18 AWG Wires)
Spring
Loaded
Contacts
5/8"
1/2"
23/32"
23/32"
5/8
1/2"
1-7/16"
Mounting Screw
used for alum/glass tubular
& hollow metal frames.