AeroAudio HP AMP AES67 TM Manual

HP AMP AES67 TM
MANUAL
The AeroAudio HPH AMP AES67 TM is a superb well designed studio quality class
AB headphone amplifier made for Jocks and producers that hides away and just does
the job you need it for.
The +20 year field proven design ensures your ears are safe from annoying cracking
audio on touching the volume knob. With a double output for both 3.5 and
6.3mm jack's makes the annoying 'where did I put it' adapters obsolete, just simply
connecting all types of studio headphones. The rock solid miniature casing hides away
under your desk with a special design so your knees are safe from painfully bumping
it. A small bright shining LED let's you find the Amp instantly.
Three key features make this amplifiers outstanding for studio use. The first feature
is the high slew rate that prevents odd order distortion anomalies.
The second feature is current-on-demand at the output that enables the amplifier
to respond quickly and linearly when necessary without risk of output distortion.
When large amounts of output power are suddenly needed, the amplifier can
respond extremely quickly without raising the noise floor of the system and
degrading the signal-to-noise ratio.
The third feature is the gain-independent frequency response that allows the full
bandwidth of the amplifier to be used over a wide range of gain settings.
WARINIG!
Without proper adjustment to the type of headphone used the HP-AMP-AES67 can produce over
100dBA @ +6dBU input level and can cause ear damage! Take proper precautions and make proper
settings to ensure the maximum legally allowed output level is not exceeded. AeroAudio strongly
advises to adjust input level to be set at 85dBA maximum output level on the headphone.
AeroAudio can not be held responsible for any type of damage or injuries in short- or long-term
caused by improper installation or use.
STEENWEG 148C - 9810 NAZARETH - BELGIUM - T +32 (0)9 396 76 40 - INFO@AEROAUDIO.EU