Advertisement
Advertisement
Table of Contents
Related Manuals for Taylor Xpress Flex
Summary of Contents for Taylor Xpress Flex
- Page 1 ™ QUICK START GUIDE...
- Page 2 COMPONENTS LIST Xpress Flex device (L-XF011) Dipper spoon w/ paddle handle (#2235) Pipet (#4030) Cap for dipping vial (3) (#6825) Counter mat (#6849) 5 mL Syringe (3) (#6858) 6849 Test strip clips (3) (#9001) L-XF011 Test strip loader (#9002) 9001...
- Page 3 1. Unpack components from the box (see components list to the left). 2. You will find four perforated holes on the counter mat. These align with the suction cups on the bottom of the Xpress Flex device. Pop out the excess material and place the mat on the counter.
- Page 4 ∙ Water sample vials (3) ∙ Pipet (use with R-9112-C prep reagent) At the core of the testing system is the Xpress Flex device. This is an advanced test strip reader that utilizes sophisticated technology to provide high-quality test results.
- Page 5 Xpress Flex gives you the freedom to use only the strips you need. You can run any combination of strips, depending on the results you are targeting. For example, iron may not be a common concern in your area, so the Flex 1 strip would mostly be used to troubleshoot.
- Page 6 The Test Strip Clip and Test Strip Loader are color-coded and labeled to match with corresponding strips to ensure proper readings. The strip loader makes adding strips simple, and it ensures the strips are aligned for accuracy. 1) Place the desired strip(s) onto the appropriate slots on the strip loader and use the strip clip to pick them up. Test: 2) Select “Start Test”...
- Page 7 In the sureTREAT software, you will see the current setting for your Flex Strip lot code on the Flex Strip Status screen when performing water tests with Xpress Flex. To change the code, click edit and select the proper code for each Flex Strip from the options on the screen.
- Page 8 rev. B #5010 11/08/21...
Need help?
Do you have a question about the Xpress Flex and is the answer not in the manual?
Questions and answers