Table of Contents
Advertisement
J.
Get the new HDD.
K.
Place the new HDD with its PCB (printed circuit board) facing the
HDD bay.
NOTE: Ensure that the port connectors of your HDD are not obstructed
by any part of the HDD bay.
L.
Reattach and secure the HDD with the screws you removed
earlier.
M.
Replace the HDD bay back in the compartment. Ensure that the
HDD connector is aligned with the Notebook PC's HDD port, then
push the HDD bay until it connects with the Notebook PC.
90
Notebook PC E-Manual
Advertisement
Table of Contents
