SKUTCH AS-703-H Manual

Thank you for purchasing the Skutch AS-703-H Promotion-On-Hold
Module. With this Module, all calls that are placed "ON HOLD" will hear
the Promotion-On-Hold audio. When the call is re-answered, the audio will
automatically disconnect.
This unit works with the Verizon NSQ412 phones.
RCA Plug
1/8" Head Phone Plug
To Skutch Box
Phone Jack
L1+2 on Phone.
Lines 1 & 2
Connect to
Head Phones
jack.
When a line is placed "ON HOLD", the corresponding LED on the AS-
703-H will light indicating that audio is being coupled to that telephone line.
The unit will play audio to all calls that are placed ON HOLD. Make sure
that you adjust the level of the music to the proper level on the audio source.

• Troubleshooting Guide

No Audio But The Lights Turn On The AS-703-H

Make sure the Message Source is playing.
Make sure the Message Source volume is turned up.
Make sure the audio cable is connected from the headphone jack
on the Audio Source, to the AUDIO IN jack on the AS-703-H.
Make sure the audio cable has the right plug for the AS-703-H
(male RCA type).
Make sure you are NOT using a "Dubbing" audio cord.
Phone
L3+4 on Phone.
Phone Jack
Lines 3 & 4
120VAC
wall outlet.
Audio
Source
Head
Phones