MADE IN ITALY
ISTRUZIONI DI MONTAGGIO
ELEMENTI PRESENTI NELLA CONFEZIONE
YOU CAN FIND THE FOLLOWING PIECES INSIDE THE BOX
LAVABO
WASHBASIN
zona dove
posizionare il silicone
area where to
place the silicone
INSTALLAZIONE CENTROSTANZA / SCARICO A PAVIMENTO
HOW TO INSTALL THE WASHBASIN WITH "FLOOR" WASTE-PIPE
1.
Sdraiare il lavabo sul pavimento
e
installare
il
sifone.
ATTENZIONE: durante il processo,
per evitare scheggiature agli
angoli, si consiglia di appoggiarlo
su un foglio di cartone, fissare
la piletta al sifone flessibile.
Lay down the washbasin
to install the siphon. Take
care of using a cardboard
sheet to avoid splintering the
washbasin. Connect the drain
to the siphon.
ASSEMBLY INSTRUCTIONS
PILETTA CON GRIGLIA
DRAIN WITH GRILLE
PAGLIETTA PER LA PULIZIA
ABRASIVE SPONGE FOR CLEANING
SIFONE FLESSIBILE
FLEXIBLE SIPHON
2.
Rialzando il lavabo, collegare
il sifone alla braga di scarico a
pavimento.
Connect the siphon to the
floor draining pipe when you
lift up the washbasin.
3.
Sollevare il lavabo su un
lato e siliconare la base del
lavabo prima di appoggiarlo a
pavimento; togliere il silicone
in eccesso.
Use silicone to seal the base
of the washbasin; take away
the silicone in excess.
4.
Installare la rubinetteria a
pavimento.
Install the floor tap.