Summary of Contents for OKU Tools EP-12
- Page 1 English Stud Gun EP-12, EP-15 Stud Gun Automatic Stud Gun EP-12, EP-15, EP-16 Operating instructions (ID-No. 00035103) 00100264 EP-12 00100265 EP-15 OKU Tools GmbH, 70374 Stuttgart, Germany...
-
Page 2: Table Of Contents
9.2 Handling of order ......................11 9.3 Explanation of spare parts list ..................11 9.4 Spare parts-set ......................11 9.5 Exploded drawing EP-12, EP-15 .................12 9.6 Spare parts list EP-12, EP-15 ..................13 10 Appendix .........................15 10.1 CE-Declaration of Conformity ..................15 10.2 Copyright ........................16 10.3 Manufacturer and contact person ................16... -
Page 3: Preface And General Information
1.1 General The operating instructions is used for safe operation of the Stud Guns (in the follow- ing referred to as “gun“) type Automatic Stud Gun EP-12 and EP-15 (ID-No. 100264, 100265)). The safety instructions included hereinafter must be observed. -
Page 4: Warranty
English Stud Gun EP-12, EP-15 1.5 Warranty Conditions of warranty: see Standard Terms and Conditions of OKU Tools GmbH. Assert warranty claims against OKU Tools GmbH immediately after detection of the defect. Warranty claims expire in each case in which liability claims cannot be made. -
Page 5: Layout Of The Safety Instructions
Consequences if disregarded: Ambient damage or damage of the gun. Other information Icons used Meaning Signal words Notes General note Note! Designates a general, useful note. Adherence hereof will ease the use of the gun. OKU Tools GmbH, 70374 Stuttgart, Germany... -
Page 6: Technical Data
Check gun for proper condition. • Do never operate a damaged gun. 4.1 Pneumatic connection The pneumatic connection is to be made by qualified per- sonnel with extensive knowledge in handling of pneumatic systems. OKU Tools GmbH, 70374 Stuttgart, Germany... -
Page 7: Operation Of The Gun
5.2 Faults during insertion 5.2.1 Studs inserted to deep Reduce the pressure applied on the gun during insertion. 5.2.2 Studs jut out off the tire Put more pressure onto the gun when inserting the studs. OKU Tools GmbH, 70374 Stuttgart, Germany... -
Page 8: Faults And Troubleshooting
(27) is riveted with the separating flap (26). Grind off closing head and drive off separating pin with a drift punch. Replace and rivet separating pin. Assemble the gun in reversed order. OKU Tools GmbH, 70374 Stuttgart, Germany... -
Page 9: Lubrication And Maintenance
Lubricate with Lubricating grease yearly Grease piston surface Lip seal grease DIN 51825-KP2K-20 slightly Separating Lubricate with Lubricating grease quarterly Grease dowel pin and flap grease DIN 51825-KP2K-20 frontal contact surface of head gun slightly OKU Tools GmbH, 70374 Stuttgart, Germany... -
Page 10: Maintenance
8 Shutdown and dismounting OKU Tools takes back your gun. We recommend you have OKU Tools professionally dismantle the gun and dispose of it. Be part of the environmental protection by recycling valuable materials. -
Page 11: Spear And Wear Parts
To the gun there is available a spare parts-set including the most important wear parts. It contains all in the spare parts list with marked parts inclusive grease and corrosion preventive-oil-spray. OKU-Id.-No. spare parts-set EP-12: 20015508 OKU-Id.-No. spare parts-set EP-15: 20015509 OKU Tools GmbH, 70374 Stuttgart, Germany... -
Page 12: Exploded Drawing Ep-12, Ep-15
English Stud Gun EP-12, EP-15 9.5 Exploded drawing EP-12, EP-15 OKU Tools GmbH, 70374 Stuttgart, Germany... -
Page 13: Spare Parts List Ep-12, Ep-15
English Stud Gun EP-12, EP-15 9.6 Spare parts list EP-12, EP-15 Item OKU part No. Designation 00031539 Coupling 00003463 O-Ring 00350297 Compression spring 00350728 Bushing 00470942 Hand grip 00350664 Piston disk 00003507 Lip seal 00004082 Hexagon nut M8 00000613 Eyebolt... - Page 14 100 ml (single) 00885028 grease, tube 20 g (single) 20015510 1 aerosol can corrosion preventive-oil (100 ml) and 1 tube grease (20 g) as maintenance-set = included in the spare parts-set OKU Tools GmbH, 70374 Stuttgart, Germany...
-
Page 15: Appendix
Studding gun models: AS-8, AS-9, EP-8, EP-9, EP-10, EP-12, EP-15, EPK-6,5, EPK-8 as delivered complies all the relevant regulations of the CE Machine Directive 2006/42/EC. Harmonized standards applied: Safety of machinery – General principles for design EN ISO 12100 –... -
Page 16: Copyright
OKU Tools GmbH Sommestrasse 6 70374 Stuttgart Telefon: +49 162 2510040 Telefax: +49 711 5006375 Internet: www.okutools.com Ihr Ansprechpartner ist: Karin Klingel Abteilung Verkauf Spikes Telefon: +49 162 2510040 Telefax: +49 711 5006375 E-Mail: info@okutools.com OKU Tools GmbH, 70374 Stuttgart, Germany...