Table of Contents
Advertisement
Position the filter mat fully on the
8.
retainers in the heat exchanger
cover.
Notes
– Ensure that the filter mat is clean
and dry, and positioned on the
retainers as shown.
– The filter mat must not be put
back if misshapen, damaged or
reversed.
– You can order a new filter mat
from our after-sale services using
the spare part
number: 12022801. Contact
information for all countries can
be found in the enclosed after-
sales service directory.
If there is visible soiling, carry out the
9.
following steps (optional):
a) Lift the middle tab on the insert
slightly.
Cleaning and maintenance
b) Pull the insert out horizontally.
c) Rinse the insert under running
water and dry it off.
d) Clean the opening in the
appliance with a soft, damp cloth.
Take care not to damage the
Note:
heat exchanger, as it is exposed.
en
39
Advertisement
Table of Contents
