Table of Contents
Advertisement
2.4
Connecting the cables
Connect the cables as the following instructions:
•
To connect the power cord: Connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
•
To connect the VGA/HDMI cable:
a.
Plug one end of the VGA/HDMI cable to the monitor's VGA/HDMI jack.
b.
Connect the other end of the VGA/HDMI cable to your computer's VGA/
HDMI jack.
c.
Tighten the two screws to secure the VGA connector.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
If you need to replace the power cord or the connection cable(s), please contact
ASUS customer service.
2.5
Turning on the monitor
Press the power button
power indicator
2-4
. See page 1-2 for the location of the power button. The
lights up in white to show that the monitor is ON.
Chapter 2: Setup
Advertisement
Table of Contents
