Brother 888-P30 Operation Manual page 53

Symptom, Cause/solution
Fabric is snagged or caught on something.
• Stop the machine and place the fabric so that it
does not get caught or snagged.
The carriage was moved while the embroidery
frame was being removed or attached during
embroidery.
• If the carriage is moved during the process, the
pattern may be misaligned. Be careful when
removing or attaching the embroidery frame.
Stabilizer is incorrectly attached, for example, it is
smaller than the embroidery frame.
Embroidery pattern does not embroider in a particular
position.
Fabric is not positioned with the proper position in
the embroidery frame.
• Use the embroidery sheet.
Loops appear on the surface of the fabric when
embroidering.
The thread tension is incorrectly set.
Embroidery bobbin thread intended for use with
this machine is not being used.
Reference
–
29
27
28
35
26
Troubleshooting
3
51