Sharp Carousel EM136A2SU-PVH Manual page 16

C O N T R O L S
MEMORY FUNCTION
(1) Press "0/MEMORY" repeatedly to choose memory setting 1-3. The display will show 1,2,3.
(2) If the setting has been program ed, press " START/ +30 SEC." to use it. If not,
with your favorite program.
(3) After finishing the setting, press "START/ +30 SEC." once to save the setting. Press " START/ +30 SEC."
again, it will start cooking.
Example: to program the following setting as the second memory to cook food with 80% microwave power
for 3 minutes and 20 seconds.
The steps are as follows:
a. In waiting state, press " 0/MEMORY" twice, the screen displays "2".
b. Press "TIME COOK" once, then press "3", "2", "0" in order.
c. Press " POWER LEVEL
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once and the LED will display "2". If you press
"START/+30SEC." again, the setting will be saved as memory 2 and it will start cooking.
e. If power is lost, the "0/MEMORY" setting will need to be reprogram e .
f. If you want to run the saved setting, in waiting state, press "0/MEMORY" twice, screen displays "2", then
press "START/+30SEC." to run.
ONE TOUCH COOK
One touch cooking allows you to cook or reheat many of your favorite foods by touching just one pad.
To increase quantity, touch the chosen pad until the number in the display is same as desired quantity to cook.
POPCORN
(1) Press " POPCORN " repeatedly until the package size of your popco
"1.75", "3.0", "3.5" will display in order.
For example, press "POPCORN" once, "1.75" appears.
" START/+30 SEC." to cook, buzzer sounds once. When cooking finished, buzzer will sound
(2) Press
five times.
POTATO
POTATO " repeatedly until the number you wish appears in the display, "1","2","3" will display
(1) Press "
in order.
"1": 1 potato (approximate 8 oz)
"2": 2 potatoes (approximate 16 oz)
"3": 3 potatoes (approximate 24 oz)
For example, press "POTATO" once, "1" appears.
(2) Press " START/+30 SEC." to cook, buzzer sounds once. When cooking is finished, a
five times.
m
Please note: only one or two stages can be set.
" once, "PL10" displays, then press "8" and "PL8" displays.
16
create the memory setting
m d
appears in the display,
rn
buzzer sounds