Fault
flashes.
All other error codes.
Malfunctions
Fault
The appliance is not work-
ing.
The programme does not
start.
The door cannot be opened. – – – is activated.
Cause
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed inicio/
.
pausa+carga
Door is not closed.
Childproof lock is activated.
termin.
is activated.
Laundry is caught in the
door.
The temperature is too high.
Troubleshooting en
troubleshooting
Close the door.
1.
Press inicio/pausa+carga
2.
start the programme.
Call the after-sales service.
▶
→ "Customer Service", Page 63
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Press inicio/pausa+carga
▶
Close the door.
1.
Press inicio/pausa+carga
2.
start the programme.
→ "Deactivating the childproof
▶
lock", Page 45
Check whether termin.
▶
ated.
→ "Buttons", Page 29
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press inicio/pausa+carga
4.
start the programme.
Continue the programme by select-
▶
ing
or
and pressing inicio/
pausa+carga
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 44
Wait until the temperature has
▶
dropped.
to
.
to
is activ-
to
.
55