LLK-266BLUE
LLK-366BLUE
Bluetooth Handfree Car Kit
and multi format (Ogg
Vorbis MP3 AAC WMA FLAC
WAV) CD Changer Emulator
- SSD player
Installation Guide
Dear Customer!
Thank You for purchasing Loudlink products! We
hope You will be satisfied, since Your satisfaction is
our primary objective.
What you need for Loudlink installation:
Loudlink Bluetooth Handsfree Car Kit /
multi format (Ogg Vorbis MP3 AAC WMA
FLAC WAV) SSD player with Microphone
CD Changer cable – if not factory fitted
already
micro SD/SDHC card
Mount the Microphone to the upper corner on
driver's side.
Connect the 3.5mm Jack plug of Microhpone to
Loudlink.
Connect CD Changer cable to Loudlink.
Be sure Head Unit is off, and please wait while LED
goes blank on Loudlink after connection!
The integrated charger operates when head unit is
on. For charging simply connect the USB charger
cable of Your mobile device to Loudlink.
Bluetooth device pairing
Switch head unit to "CD Changer", than navigate to
CD2.
„Previous Track" (<<) button
disconnect the already connected mobile device.
"Next Track" (>>) button
disconnect the already connected mobile device,
and start pairing an another one.
Please be patient, within few seconds You'll see
„Loudlink CarKit" in Bluetooth devices list.
Pair with "2222" PIN code if asked, and switch head
unit back to CD1.
After succesful paring, you can manage your calls,
navigate within multimedia sources (audio, video,
online radio, etc.) using factory fitted steering wheel
remote control buttons (if have), and / or head unit
CD Changer control buttons.
During media playback the following functions are
available on CD1:
"Previous Track" (<<)
play the previous track
„Next Track" (>>)
play the next track