Connecting Ipoe-175 To Pd - Planet IPOE-175 User Manual

3.4 Connecting IPOE-175 to PD

Users MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
EMD (Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY.
3.5 Connecting IPOE-175 to PD
Step 1: Connect the additional Cat5e/6/6A cable from the PoE++ Out of the
IPOE-175 to a remote PD.
Ethernet Switch
DC24-56V
Power
Power Supply
Step 2: The PoE++ Out port is the power injector which transmits DC
voltage to the Cat5e/6/6A cable and transfer data from the Data
source.
10
Data
DC
Earth Ground
802.3bt PoE++
100m
PoE
Power Data
IPOE-175
PoE
DC
PoE IP Camera
1000BASE-T UTP
1000BASE-T UTP with PoE
Power Line (DC)