Protect the surface of the product with cloth if you are using any product with rubber feet or base. ASSEMBLY TOOLS REQUIRED NOT INCLUDED ITEM NO.: OT-202S Printed in Vietnam ISSUED DEC 26, 2016 - 2 -...
(M4 x 30mm x 110mm) ITEM ONLY. Pan head screw Short screw *Metal knob: (M4x22mm) (M3 x 15mm) *Wooden knob:(M4x25mm) Bolt Shelf support bracket (M6 x 35mm) Spring washer (6.5 x11mm) ITEM NO.: OT-202S Printed in Vietnam ISSUED DEC 26, 2016 - 4 -...
Page 5
Tighten with Allen key (6). STEP 2 Attach side panels (E) to top (A) with bolts (3), and washers (4) and (5) as shown below. Tighten with Allen key (6). ITEM NO.: OT-202S Printed in Vietnam ISSUED DEC 26, 2016 - 5 -...
Page 6
(4) and (5) as shown below. Tighten with Allen key (6). STEP 3 STEP 4 Attach legs (H) to the unit by screwing them into bottom frame (F), as shown below. ITEM NO.: OT-202S Printed in Vietnam ISSUED DEC 26, 2016 - 6 -...
Page 7
Attach brackets (8) to the unit as shown below. Place shelf (G) on the brackets and attach with screws (7). Tighten with a screwdriver. STEP 6 Attach knobs (1) to front of drawers with pan head screws (2), as shown below. Tighten with a screwdriver. ITEM NO.: OT-202S Printed in Vietnam ISSUED DEC 26, 2016 - 7 -...