Table of Contents
Related Manuals for Hall Technologies HT-Satellite-BT
Summary of Contents for Hall Technologies HT-Satellite-BT
- Page 1 Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com HT-Satellite-BT Portable USB and Bluetooth Conference Speakerphone User Manual Version: 1.0 Hall Technologies November 10, 2022 Page 1 of 11...
- Page 2 8. Protect the power cord from being walked on or pinched particularly at plugs. 9. Only use attachments / accessories specified by the manufacturer. Refer all servicing to qualified service personnel. Hall Technologies November 10, 2022 Page 2 of 11...
-
Page 3: Table Of Contents
Package Contents ........................4 Panel Description ..........................5 Applications ............................7 Application 1: USB ........................7 Application 2: Bluetooth ......................7 Firmware Update ..........................8 Troubleshooting ..........................9 Specifications ..........................10 Hall Technologies November 10, 2022 Page 3 of 11... -
Page 4: Introduction
Introduction OVERVIEW The HT-Satellite-BT is a portable USB and wireless Bluetooth speakerphone. It allows everyone to hear the sound in a small meeting room during conference calls and is compatible with all major UC platforms including Microsoft Teams, WebEx by Cisco, Google Meet, and Zoom. The compact sleek design allows for use at home, in the office, and in the hotel during travel. -
Page 5: Panel Description
Description Powers the device on/off. Ÿ Power ON: When the HT-Satellite-BT is off, press and hold the Power button for around 1~2 seconds. During power up, all LEDs will blink white and then turn off, and the Power LED will remain white. - Page 6 Bluetooth LED. Note: When the HT-Satellite-BT has less than 10% battery life, the LED of the battery will blink red. Ÿ Press button: the volume decreases one step at a time.
-
Page 7: Applications
Ÿ Microphone Name: HT-Satellite-BT APPLICATION 2: BLUETOOTH 1. To connect a new device, hold the Bluetooth button for 3 seconds to put the HT-Satellite-BT into pairing mode. 2. When in pairing mode, the LED light will blink blue, and the HT-Satellite-BT can then be discovered by other Bluetooth enabled devices. -
Page 8: Firmware Update
1. Install the application: XUpgradeTool_000-1.0.4-Setup.exe 2. Use the USB cable to connect the HT-Satellite-BT to the PC 3. Power on the HT-Satellite-BT and press the following buttons in the order shown to put the HT-Satellite-BT into factory mode: “Mute” > “Power” > “+” > “Power” > “-“ > “Power”... -
Page 9: Troubleshooting
1. During a soft codec call (i.e. GoToMeeting, Meet, Teams, Zoom etc.) with the laptop connected to the HT-ODYSSEY the far end cannot hear the local room participants talk. a. Verify the mic of the HT-Satellite-BT is not in Mute mode (in Mute mode all LEDs light up red). -
Page 10: Specifications
-20°C to 60°C (-4°F to 140°F) Humidity 10% to 90%, non-condensing Human-body Model: ESD Protection ±8kV (Air-gap discharge)/±4kV (Contact discharge) Device Dimension (W x H) 123.01mm x 35.8mm / 4.84” x 1.41” Product Net Weight .21kg/0.46lbs Hall Technologies November 10, 2022 Page 10 of 11... - Page 11 © Copyright 2022. Hall Technologies All rights reserved. 1234 Lakeshore Drive, Coppell, TX 75019 halltechav.com / support@halltechav.com (714)641-6607 Hall Technologies November 10, 2022 Page 11 of 11...
Need help?
Do you have a question about the HT-Satellite-BT and is the answer not in the manual?
Questions and answers