Photo Viewer Software (For Macintosh Os X) - Coby DP-151 Instruction Manual

● Rotate: Click [ ] or [
clockwise or clockwise, respectively.
● Save: Click [ ] when you are finished to save the ad-
justments and add the photo to the "Device Panel".
Transferring Files to the Key Chain
Transfer the photos collected in the Device Panel to the
Key Chain.
1. Click [ ] (located in the upper-right corner of the "De-
vice Panel") to start the transfer process.
2. When the transfer is complete, the Key Chain will dis-
play "Downloaded".
3. Quit the Photo Viewer software and then disconnect the
Key Chain from the computer.
To avoid damage to the Key Chain or your photos, do
not disconnect the Key Chain from the computer until
Steps 2 and 3 are complete.

Photo Viewer Software (for Macintosh OS X)

The included Photo Viewer software is required to transfer
your digital photos to the DP-151 Digital Photo Keychain.
The following instructions are for the Macintosh OS X
version of the Photo Viewer Software. For instructions for
Coby Electronics Corp.
] to rotate the photo counter-
the Windows version of this software, please refer to the
corresponding section of this instruction manual.
Installing the Photo Viewer Software
The Macintosh Photo Viewer software requires a computer
running Macintosh OS X.
1. Make sure the Key Chain is disconnected from the
computer.
2. Place the Installation CD into the computer's CD/DVD
drive.
3. Open the "Sitronix for MAC" folder and double click the
"Photoviewer Install V1.2" file to launch the installation
program.
4. Follow the on-screen instructions to complete the instal-
lation.
Using the Photo Viewer Software
1. Connect the Key Chain to the computer with the USB
cable.
2. Use or to select" USB Update" and press
confirm.
3. Double-click the Photo Viewer icon in the "Applications"
folder to start the Photo Viewer software.
[10]
to
www.cobyusa.com