RAB FFLEDXS Instructions

INSTRUCTIONS
FIELD-ADJUSTABLE FFLED® INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We'd love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing the xture. No user serviceable parts inside.
KNUCKLE MOUNTING
(Suitable for FFLEDXS, FFLEDS, FFLEDM Only)
1. Seal Knuckle Threads using Tefl on tape or silicone sealant
(not provided).
2. Secure the LED fl ood to a 1/2" NPS hole in a junction box or
landscape post (supplied by other).
3. Plug all unused holes and seal threads with silicone.
4. The swivel Knuckle on the LED fl ood allows 180° of vertical
aiming adjustment depending on mounting location. Loosen
Locking Screw and adjust Fixture to desired angle (Fig. 1).
Fig: 1
Locking Screw
TRUNNION MOUNTING
(Suitable for FFLEDM, FFLEDL Only))
1. Loosen the Pivot Bolts and angle
2. Adjust fi xture to desired angle.
3. Tighten Pivot Bolts and angle Locking Screws.
Knuckle Mount
Knuckle Threads
Locking Screws
Locking Screws (Fig.
2).
Fig: 2
Pivot Bolts