Maxair 2782-06 CART Installation Manual

CAUTION:
!
Before using MAXAIR Systems products, refer to the User's Instructions Manual, P/N 03521015, shipped with each
MAXAIR Helmet (available at www.maxair-systems.com>SUPPORT>USER MANUALS).
REF 2762-01
Shelf, internal
REF 2742-01
Symbol Definitions
!
Warning, Caution, or Note
!
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
familiar with the system's NIOSH approved configuration.
Read and understand the User's Instructions Manual.
Failure to follow the User's Instructions Manual may be hazardous to
the user's health.
The institution using this product in any application is responsible for
determining the appropriateness of this equipment relative to
regulatory requirements. Bio-Medical Devices Intl, Inc. does not
recommend the appropriate systems for a particular institution or
facility.
DO NOT use a MAXAIR System if any component is or may be dam-
aged, contaminated, or degraded and therefore possibly unfit for safe
and effective use. Replace questionable components immediately
before any use of components and systems.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
Follow current local regulations governing biohazard waste to safely
dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
Page 1 P/N 01423228 Rev B
Storage Rack,
side mount
REF
Reference Number
System or component, be sure to be
Shelf and Rack Installation Guide
Intended Use
The 2782-06 Cart includes two 2762-01 Internal Shelves.
Additional 2762-01 internal shelves may be purchased for additional
Helmet storage. Each shelf may be adjusted for height within the
Cart in increments of approximately one inch.
One optional 2742-01 external, side mount, storage rack may be
added on either or both ends of the Cart for additional storage.
Standard 2782-06 Cart with standard internal
Shelves adjusted to maximize additional storage
space internally, and optional external storage
Racks added on both Cart ends.
Specifications
Materials
Shelves are polycarbonate supported by aluminum sides.
Racks are fabricated from powder coated galvanized steel.
Dimensions
REF Height
(in/cm)
2762-01 3.25/8.26
Shelf
2742-01 34.25/87
Rack
2782-06 CART
Width Depth
(in/cm) (in/cm)
32/81.28 14/35.56
18.75/47.63 13.375/33.97