Safavieh Furniture Troy AMH4116A Manual

Product dimensions: 53.75"w x20"d x 30.5"h

CARE AND MAINTENANCE

Always use felt pads under all articles to prevent discoloration or softening of the

lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills

immediately and avoid common hazards such as hot dishes, harsh solvents and

abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with

water or furniture polish. On highly used surfaces we recommend applying a quality

paste wax which should be used on a regular basis to provide additional protection from

scratches and spills. How often you apply the wax depends on how much wear the

furniture receives.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish during

assembly

* This item may require periodic tightening

Part List and Hardware List

DESCRIPTION

PIECE

Table top

Leg

Spring washer

Cap nut

Hexagon nut

Spanner

PICTURE

QUANTITY

Model# AMH4116A

Product Dimensions: 53.75"W X20"D X 30.5"H

Table of Contents

Do you have a question about the Troy AMH4116A and is the answer not in the manual?

Page 1 CARE AND MAINTENANCE Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Page 2 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included): Spanner Step Attache the leg (B) to the table top (A) and use the spanner (H4) to tighten the washer (H1) and the cap nut (H2) and the nut (H3) .