DuraMax Duragrain Privacy Assembly Instructions

Advertisement

Gate Kit Assembly Instructions

Gate Lock and Hinges are not included
Have Questions?
Call us at 1-800-483-1361
Engineered For The Southwest Sun
www.duramaxbp.com
DURAGRAIN PRIVACY
TM
PLEASE READ THESE
INSTRUCTIONS
BEFORE ASSEMBLY
During assembly, vinyl components should be
laid on a non-abrasive surface (i.e. cardboard or
drop cloth) so as not to scratch.
• Use care when applying PVC cement, as it
dries quickly. Vinyl should be cleaned with
a mild detergent and non-abrasive cleaning
pad or sponge.
• Vinyl components should be assembled
without using excessive force, to avoid
breakage.
• Assemble gate after fence installation, to
accurately locate hinge and latch post and
proper width size.
• Gates should not be made any wider than
48", to avoid sagging from hinge post.
• All hinge posts, properly installed, should
have steel insert and be filled at least 75%
with concrete.
• Cut Top and Bottom rail 2" shorter than
distance between hinge and latch post.
For Example: If the gate opening is 44"
cut Top and Bottom rail to 42".
TOOLS NEEDED
• Measuring Tape / Ruler
• Pencil
• Screw Driver (Phillips #2)
• Drill with �⁄��" bits
• Drop Cloth
• Square Level
• Rubber Mallet

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Duragrain Privacy and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DuraMax Duragrain Privacy

  • Page 1 DURAGRAIN PRIVACY Gate Kit Assembly Instructions PLEASE READ THESE INSTRUCTIONS BEFORE ASSEMBLY During assembly, vinyl components should be laid on a non-abrasive surface (i.e. cardboard or drop cloth) so as not to scratch. • Use care when applying PVC cement, as it dries quickly.
  • Page 2 D UR AG R A IN P R I VACY GAT E K I T A SSE MBLY INSTR UC T IO NS Pocket Rail Metal Support Installation Step 1 Metal Pocket Rail Support Pocket Rail Bottom Slot Pocket Rail Metal Support Figure 1 (4 Pieces Included) Insert tightly the Metal Pocket Rail support into the empty bottom slot of the...
  • Page 3 DU R AG R A IN P R I VACY GAT E K I T A SSE MBLY INST RUC T IO NS Picket and Rail Installation Step 3 Picket End Channel Picket End Channel Figure 3a Figure 3b Slide a Picket into the End Channel as shown in Figure 3a & 3b. Pocket Rail Pocket Rail Pocket Rail...
  • Page 4 DUR AG R A IN P R I VACY G AT E KI T A SSE MBLY INST RUC T I ONS Uprights Post Metal Support Installation Step 4 Corner Lip Corner Lip Insert Figure 4a Figure 4b Insert one Uprights Post Metal Support Using the 1½"...

Table of Contents