Table of Contents
Advertisement
2584.3 en.qxd
TV menu
Installation
Languages
Country
Time zone
Channels
Preferences
Connections
Decoder
.............
Info
Great user manuals database on
29-03-2007
10:48
Pagina 27
How to search for and store TV channels (Continued)
Analogue: manual installation
Channels
Autom. installation
Installation update
Digital: test recept..
1. Select Analogue: manual installation and press the
Analogue: manual..
2. Select System.
Rearrange
3. Select your country or part of the world where you are
4. Select Search and press the cursor right.
5. Select the red or green colour key to proceed.
6. Press the cursor left to store the channel found or to
7. Select Fine tune and press the cursor right.
8. Select Store current channel if you want to store the
9. Use the rearrange menu to rename or reshuffle the
Note: when on a frequency where a DVB signal is
UserManuals.info
This gives you the possibility to manually install (tuning-in
channel by channel) analogue channels. Manual installation
will not find nor store any DVB-T (digital) channels.
cursor right.
now located.
Tip: if you know the frequency, enter the 3 digits of the
frequency with the digit keys 0 to 9 (For example, 049).
search for another channel.
Fine tuning can be useful when the frequency has shifted a
bit or when interference of another frequency occurs.
Adjust the frequency with the cursor up/down in case of
poor reception of the channel found.
(fine tuned) frequency under the current channel number.
Press the cursor right and confirm with the
Select Store as new channel if you want to store the
(fine tuned) frequency under a new channel number.
Press the cursor right and confirm with the
channels. See next page.
broadcasted, the tuner will try to decode an analogue TV
channel, and hence will not show video.
EN
key.
OK
OK
key.
27
Advertisement
Table of Contents
