Passive power distributor AC295x 1 Preliminary note You will find instructions, technical data, approvals, accessories and further information using the QR code on the unit / packaging or at www.ifm.com. 1.1 Symbols used Requirement Instructions Reaction, result [...] Designation of keys, buttons or indications...
AC295x Passive power distributor 2 Safety instructions • The unit described is a subcomponent for integration into a system. – The system architect is responsible for the safety of the system. The system architect undertakes to perform a risk assessment and to create documentation in accordance with legal and normative requirements to be provided to the operator and user of the system.
Passive power distributor AC295x 3 Intended use The passive ProcessLine power distributor can be used to supply IO-Link masters or AS-i modules and intelligent sensors/actuators. Each supply connection (AS-i operation: AS-i / AUX; IO-Link operation: US / UA) has overcurrent detection (no shutdown). •...
AC295x Passive power distributor 4 Installation 4.1 Install device u Disconnect the power to the machine during installation. u Use a flat mounting surface for installation. u Fix the unit to the mounting surface using 2 M5 mounting screws and washers, max. tightening torque 1.8 Nm.
Passive power distributor AC295x 5 Electrical connection The unit must be connected by a qualified electrician. Observe the national and international regulations for the installation of electrical equipment. Disconnect power. Voltage supply according to SELV / PELV. The IP rating of the overall system depends on the protection ratings of the individual devices, the applied connection elements and the corresponding protective caps.
Passive power distributor AC295x 6 Operating and display elements LED FLT UA ⁄ AUX LED FLT US ⁄ AS-i LED US ⁄ AS-i LED UA ⁄ AUX Fig. 1: LED assignment LED US / AS-i green: US / AS-i voltage supply ok LED UA / AUX green: UA / AUX voltage supply ok LED FLT US / AS-i flashes red:...
Passive power distributor AC295x 8 Maintenance, repair and disposal The operation of the unit is maintenance-free. Only the manufacturer is allowed to repair the unit. u After use dispose of the device in an environmentally friendly way in accordance with the applicable national regulations.