GENERAL SAFETY IMPORTANT INFORMATION Read this manual thoroughly before you start using the product. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning...
Page 5
GENERAL SAFETY (Cont.) • It is not intended for commercial/industrial or trade use. Do not use it outdoors. • Do not use this product for anything other than its intended purpose, and only use it as described in this manual. •...
Page 6
GENERAL SAFETY (Cont.) • Do not leave the product unattended when the power is turned on. • Ensure the product is switched off before removing hot contents it from the base. Do not move the appliance while it is switched on. •...
Page 7
GENERAL SAFETY (Cont.) ELECTRICAL SAFETY AND POWER CORD HANDLING • Before connecting the product to the power supply, make sure your outlet voltage and circuit frequency correspond to the voltage indicated on the appliance rating label and your outlet socket is properly earthed. If this is not the case, do not use the product.
INSTALLATION Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. UNPACKING • When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undamaged and in good working order.
HOW TO USE Delight in using a variety of meats, cheeses and vegetables in your Jaffle Maker. Inset the mains plug into the power outlet, you will notice that the power indicator will go on, indicating that the appliance has begun pre-heating. 2.
CLEANING & MAINTENANCE Before cleaning, unplug from the appliance and let the appliance cool down completely. Wipe the upper and base cooking surface plates with soft dry cloth, never use metal polish. Make sure to clean the edges of the plate also. Wipe the outside with only a slightly moistened cloth ensuring that not moisture, oil or grease enters the cooling slots.
Need help?
Do you have a question about the GJM-900B and is the answer not in the manual?
Questions and answers