Advertisement
Quick Links
Merlyn Industries Ltd (MER01)
Declaration of performance number
Shower enclosures with aluminium
profiles and safety glass
Cleanability
Impact resistance/
shatter properties
Durability
MERLYN
Merlyn Showering
Unit 8, Purcellsinch Industrial Park,
Dublin Road, Kilkenny, Ireland.
Tel: 00353 56 779 1555
Fax: 00353 56 779 1576
www.merlynshowering.com
To download the Declaration of Performance (DOP) for
this product please use the link below.
https://merlynshowering.com/aftersales-support/dop-certs/
20
EN 14428
CEARH1.2
: Pass
: Pass
: Pass
Wall Hinge Door & Inline Panel
with Side Panel
INSTALLATION GUIDE
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for MERLYN ARYSTO COLOUR GHH900H
- Page 1 Wall Hinge Door & Inline Panel with Side Panel Merlyn Industries Ltd (MER01) EN 14428 Declaration of performance number CEARH1.2 Shower enclosures with aluminium profiles and safety glass Cleanability : Pass Impact resistance/ : Pass shatter properties Durability : Pass...
- Page 2 AC15 AC20 ×2 AC18 AC25SPACER AC19 ×2 ×2 ×2 ×2 A06S0046 Cover cap ×1 ×2 AC35 MGVC45 AC34 AC36 ×1 ×1 ×1 Installation ×1 MG8x51PLUG MGST5X65 AC07 8S1300511 AC06 ×10 ×1 ×1 ×1 4×30 screw MG6x30PLUG Bracing bar ×2 ×1 AC13 Cover cap A06S0046...
- Page 3 Step 3 Step 1 IMPORTANT! Before assembling the brackets to the side panel make sure it is orientated the Whether fitting on a tray or on a tiled correct way. Measure hole centres from top and bottom to determine correct Wetroom the tray or floor must be 100% level! orientation of panel.
- Page 4 Step 5 Step 7 Fix the wall brackets making sure to have the wall bracket in the center of the Remove both fixed panels and the bottom track, then drill holes with 8mm diameter hole in the glass. masonry bit and insert wall plugs. Ensure the wall plugs are flush with the tile. IMPORTANT ! This is critical as it is where the panel adjusts.
- Page 5 Step 9 Step 12 Before fitting the front inline panel to the side panel make sure the notch in the glass Fix wall brackets to the pre drilled holes. Do not fully tighten, leave enough slack for is to the top and on the side closest to the side panel. Clean the inside of the inline adjustment.
- Page 6 Step 14 Step 16 Loosen grub screws on corner bracket and push firmly into position. Fully tighten Place locating aids on threshold, one each side of opening. Lift door onto locating grub screws once in position. aids. locating aids fix corner bracket Door Track Step 15...
- Page 7 Step 18 Step 20 Lift door onto positioning aids. Secure the moving panel in place with the door To remove bottom positioning aids open door outwards. holding seal SP010SP281000. INSIDE Step 21 Step 19 Measure distance between the wall and edge of inline panel. Cut infill seal on the Loosely fix hinges to wall starting at the top.
- Page 8 Step 22 Step 24 Left and right hand seal kits (A) are provided, determine handing and use Fit the handle to the door. appropriate seal kit. Left hand model shown below. Push on longest seal between hinges onto back edge of moving panel. Take shortest seal and fit to top keeping notch to hinge.
- Page 9 Step 27 Door adjustment Step 25 Adjusting fixed and hinged panels. To adjust door to get required contact against closing seal first support door If after fitting doors and fixed panel and you still need adjustment to align doors with door locating aids. Loosen all bolts fixing both hinges to glass and move by etc, you can achieve this by loosening the screws fixing the plate/hinge to the wall required amount.
- Page 10 Seal vertically along the wall, along the outside edge of the bottom profile and any joins in the profile, including where the bottom track meets the end brackets. 2 4 h. Merlyn Industries Ltd (MER01) EN 14428 Declaration of performance number CEARH1.2...
Need help?
Do you have a question about the ARYSTO COLOUR GHH900H and is the answer not in the manual?
Questions and answers