Fantech AC1209 Installation & Maintenance Instructions

INSTALLATION &
MAINTENANCE
INSTRUCTIONS
AC1209
AC1212
AC1215
1. GENERAL
1.1 It is important these Installation and Maintenance Instructions are fully adhered to.
1.2 Full details of the unit supplied are shown on the product nameplate.
If in doubt about any detail, contact FANTECH or its agents for clarification.
1.3 Electrical installation must be carried out by suitably qualified and competent personnel in accordance
with all current statuary requirements.
1.4 Any declarations made by FANTECH about product installation and safety,
are dependent on the air curtain being used within installations which themselves meet the
requirements of the relevant Standards and Directives of your region.
1.5 The air curtain must be installed in a dry, sheltered position and is not suitable for operating in
temperatures above 40 °C. The air curtain is not suitable in corrosive or explosive atmospheres.
1.6 The installer should provide easy access to the air curtain to facilitate future maintenance.
1.7 The installer should ensure the air curtain is adequately supported.
1.8 This product is not intended for use by young children or infirm persons unless they have been
adequately supervised by a responsible person to ensure that they can use the product safely. Young
children should be supervised to ensure that they do not play with the appliance.
SPECIFICATIONS
Voltage Frequency
Model
(V)
AC1209 230
AC1212 230
AC1215 230
Part No: INST-AIRCURTAIN
These instructions must be read fully
before commencing installation.
Low Speed
Current Power
(Hz)
(A) (W)
50 0.956 220
50 1.217 280
50 1.522 350
Version 1.1
Outlet
Noise Current
Velocity
(dB(A)) (A)
(m/s)
15 54 1.2
15 55 1.391
12.5 54 1.896
High Speed
Outlet
Power Noise
Velocity
(W) (dB(A))
(m/s)
276 18 57
320 18 58
436 14 57
09/21
Page 1/4