Summary of Contents for Optiled REAL CLEAN OPCL-GL15X3
- Page 1 REAL CLEAN 日本のデザイン Designed in Japan UV-C Air Sanitizer Model: OPCL-GL15X3 Powerful UV-C Lamps 253.7nm...
- Page 2 日本のデザイン Designed in Japan Thank you for purchasing Optiled REALCLEAN UV-C Air Sanitizer. REALCLEAN uses powerful UV-C technology to disinfect the air. Before you start using REALCLEAN, please ensure you have read this instruction manual, including warnings and safety precautions, and followed the directions for installation, use and maintenance.
-
Page 3: Product Overview
Product Overview ■ Top View ■ Internal Structure ■ Front View Timer Knob 3x UV-C Lamps Power Button Fan guard Fan Speed Knob Air Reflector Indicator Light Safety Sensor Front Cover Screws (4 parts) Air Inlet Specification Model OPCL-GL15X3 Power Consumption Color (B): Black (W): White Weight... -
Page 4: Warnings And Safety
Warnings & Safety WARNINGS Photobiological Skin or eye damage may result from directly viewing the light produced by the Always ensure the product is DISCONNECTED from the power socket and lamp in this product. Always disconnect power before relamping or servicing. switched OFF before installation, lamp replacement and any cleaning or Replace lamps with TUV T8 double please ended germicidal UVC lamps maintenance. -
Page 5: Getting Started
NOTE A built-in safety switch is designed for this product, so that the product will not The indicator light is an LED that does not emit any UV-C radiation. operate in the case of incorrect installation. The product may cause interference with other electronic equipment and Always supervise children when they are near the product. - Page 6 II. Replacing the UV-C Lamps (GL15) ENSURE YOU HAVE READ ALL THE WARNINGS AND SAFETY PRECAUTIONS BEFORE PROCEEDING WITH LAMP REPLACEMENT MAKE SURE THE PRODUCT IS DISCONNECTED FROM THE POWER SOCKET AND SWITCHED OFF BEFORE YOU MOVE THE FRONT COVER TO REPLACE LAMPS. Twisting 90 degrees 1.
-
Page 7: Air Intake
III. Cleaning and Maintenance ENSURE YOU HAVE READ ALL THE WARNINGS AND SAFETY PRECAUTIONS BEFORE PROCEEDING WITH CLEANING AND MAINTENANCE MAKE SURE THE PRODUCT IS DISCONNECTED FROM THE POWER SOCKET AND SWITCHED OFF BEFORE YOU REMOVE THE FRONT COVER OR CONDUCT ANY CLEANING OR MAINTENANCE. DO NOT USE ANY DETERGENT OR SOLVENTS IN CLEANING, USE WATER ONLY. -
Page 8: Warranty And After-Sales Service
Please check the following FAQ if you have problem when using the product. If you cannot find the problem you encounter below, or these steps do not resolve your issue, please contact your local dealer. ISSUE SOLUTIONS ● Check if the product is connected to a power socket with correct voltage. (e.g. AC220-240V for Hong Kong) Q1.