Advertisement
Advertisement
Table of Contents
Summary of Contents for Neoteck GV-BA01
- Page 2 Digital to Analog Converter with Headphone Amplifier Built-in Bluetooth V5.0 Receiver NOTE: The Bluetooth DAC S/PDIF input only supports PCM and LPCM audio signals and does not support Dolby, DTS, or other surround sound signals. Therefore, It is important that the digital audio output of your device defaults to or can be set to PCM/LPCM output.
- Page 3 Input selector for optical, coaxial or Bluetooth. Input signal indicator 1 – Bluetooth signal LED 2 – Toslink signal LED 3 – Coaxial signal LED For Headphone. Gain switch for output audio. ON/OFF Selector and Volume Control. Micro-USB: DC 5V input power connect. L/R Analog stereo audio output.
- Page 5 You can connect your mobile device with your audio converter using Bluetooth wireless technology. 1: Power on and switch to Bluetooth input, the No. 1 Bluetooth signal LED will be lit and blinks blue. 2: On your device, enable the Bluetooth feature, open your mobile phone Bluetooth, and pair this new device when you initial connect it.
- Page 6 The device built-in Microphone and support phone call function by Bluetooth. When contacted the Bluetooth and have a call. You also can use the selector button to control this call. Function What to do Answer a call Press select button End a call Press select button Decline an incoming call...
- Page 7 When using a mobile phone to Shor t pre ss but t on: connect to the audio converter via Bluetooth, when a call comes in, short press the select button to answer the call, and in the call state, short press the select button again to hang up.
- Page 8 Pls use the machine as the instruction listed to keep the long use lifetime of the machine. 1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty Ercm, and oxidative environment. 2. All parts will be free from the strong shake, hit, fall. 3.
Need help?
Do you have a question about the GV-BA01 and is the answer not in the manual?
Questions and answers