Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kensington Locking Kit for Mac Studio
Summary of Contents for Kensington Locking Kit for Mac Studio
- Page 1 Locking Kit for Mac Studio...
- Page 2 Attaching the lock. Connecting a locking cable (sold separately). 1. Rotate the two parts of the locking plate adapter so that they are perpendicular to each other. Locate the pin on the locking plate and insert it into the connection point on the underside of the Mac Studio. 4.
- Page 3 Disconnecting a locking cable (sold separately). 1. Locate the notches next to the combination wheel. Rotate the numbers to the correct combination, so that they align with the notches. 6. While the lock head button is depressed, insert the lock head into the slot on the locking plate adapter. 2.
- Page 4 2. Insert an unbent end of a paper clip into the slot on the end of the lock head. Setting the combination lock code. 3. Depress the paper clip into the lock head as far as it will go. 4. Rotate the paper clip clockwise 90 degrees. 1.
- Page 5 5. With the paper clip rotated 90 degrees, set the numbers to the desired combination, ensuring that the desired numbers are aligned with the notches. 6. Once the combination is set, rotate the paper clip counterclockwise 90 degrees and remove. Your lock is now ready for use.
- Page 6 For support, visit kensington.com/support.
Need help?
Do you have a question about the Locking Kit for Mac Studio and is the answer not in the manual?
Questions and answers