Summary of Contents for ALISEO VentilClima 010 LCD 2T
- Page 1 010 LCD 2T / 010 LCD 4T On board electronic control MINISLIM IOM_010_01 Installation and use manual...
-
Page 2: Key Function
010 LCD 2T / 010 LCD 4T On board electronic control SMART TOUCH electronic control panel with device side continuous modulation These controls make room temperature adjustment (with After 20 seconds from the last action the panel offset settable from the keyboard) completely autonomous brightness will be reduced for improved night-time through the AUTO, SILENT, NIGHT and MAX programmes comfort, and the room temperature will appear on the... -
Page 3: Temperature Selection
010 LCD 2T / 010 LCD 4T On board electronic control General On Switch In order to manage the device via the control panel, this also be switched on. must be connected to the mains electricity. - Turn the device on by activating the general switch If a general switch is installed on the power line, this must Activation To activate the device... - Page 4 010 LCD 2T / 010 LCD 4T On board electronic control Automatic operation Operation Display Press and hold the AUTO key. The function being activated is indicated by the relevant symbol appearing on the display. Ventilation speed adjustment is carried out automatically point, according to a PI-type algorithm.
-
Page 5: Room Temperature Probe Regulation Offset
010 LCD 2T / 010 LCD 4T On board electronic control Deactivation 1.15 Operation Display Press and hold the ON Stand-By key for approx. 2 seconds. No illuminated signals on the display at all means that the system is in stand-by (no operation). The controller also ensures anti freezing when in stand-by. - Page 6 www.aliseogroup.com a trademark of A GROUP A GROUP S.p.A. Via Monte Grappa, 67 - 31020 San Zenone degli Ezzelini (TV) - Italy Tel. +39 0423 969037 - Fax +39 0423 968197 info@ventilclima.com - ventilclima.com M A D E I N I TA LY...