Table of Contents
Advertisement
Quick Links
Service instruction 46 – Troubleshoot/repair hose spreader
2020-03-30
Machines concerned: EVO Cleaner
Attended: When the hose spreader stops working.
Symptom: The hose does not roll up evenly on the hose reel.
Necessary equipment: Screwdriver, Heating gun, MS Polymer, 10 mm wrench
Background: The hose spreader is mounted to roll up the hose evenly distributed on the hose reel. For
various reasons, it happens that it stops. Here we go through different errors and the solutions to these
problems
1. Start the robot. Lower the det transport wheel so the robot stands with the rear wheels in the
air
a. Double click on the rear wheel of the robot, the drive wheels will then start to drive, the
hose reel will try to roll up the hose and the hose spreader will start to swing in its motion
2. If the hose spreader is not moving, wait for at least 2 minutes, the hose spreader can stand
and wait at its turning point before turning. If it does not start, then the troubleshooting
begins in the hose spreaders enclosure.
*********************************************************************************************************************
Envirologic AB
Söderforsgatan 1
SE-752 28 Uppsala
tel. +46 18 39 82 30
E-mail:
service@envirologic.se
www.envirologic.se
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Envirologic 46
- Page 1 Service instruction 46 – Troubleshoot/repair hose spreader 2020-03-30 Machines concerned: EVO Cleaner Attended: When the hose spreader stops working. Symptom: The hose does not roll up evenly on the hose reel. Necessary equipment: Screwdriver, Heating gun, MS Polymer, 10 mm wrench Background: The hose spreader is mounted to roll up the hose evenly distributed on the hose reel.
- Page 2 4. Due to vibrations in the robot, the connectors may jump of its place. To fix this we put a small amount of MS Polymer on the connector to hold it in place ********************************************************************************************************************* Envirologic AB tel. +46 18 39 82 30 Söderforsgatan 1 E-mail: service@envirologic.se SE-752 28 Uppsala www.envirologic.se...
- Page 3 Here you can see how water has flowed in from different entrances ********************************************************************************************************************* Envirologic AB tel. +46 18 39 82 30 Söderforsgatan 1 E-mail: service@envirologic.se SE-752 28 Uppsala...
- Page 4 If this does not work, change the spreader motor ********************************************************************************************************************* Envirologic AB tel. +46 18 39 82 30 Söderforsgatan 1 E-mail: service@envirologic.se SE-752 28 Uppsala...
- Page 5 10. Reassemble the parts in reverse order, make sure the hose spreader rod is fitted in the right position at the hose reel and travels equally far in both directions. ********************************************************************************************************************* Envirologic AB tel. +46 18 39 82 30 Söderforsgatan 1 E-mail: service@envirologic.se SE-752 28 Uppsala www.envirologic.se...
Need help?
Do you have a question about the 46 and is the answer not in the manual?
Questions and answers