Page 2
the controls A) Mode Selector Switch Selects between Mode 1 and Mode 2 B) Mode 1 Volume Master volume control in Mode 1 only C) Mode 1 Tone Master tone control in Mode 1 only D) Low-cut Tone Capacitor On/Off Engages a tone capacitor into the circuit for a brighter sound in the up position.
Page 3
mode 1 mode 2 Mode 1 is selected when the Mode Selector Switch (A) is in the up position, Mode 2 is selected when the Mode Selector Switch (A) is in the down or toward the strings. This mode engages the neck pickup only, and is position, or away from the strings.
troubleshooting no sound: 1. Turn volume knobs up 2. Use Mode 1 3. Use Mode 2 and turn on the Neck and/or Bridge pickup switch bridge pickup not working: 1. Switch to Mode 2 2. Turn Bridge pickup switch on 3.