Advertisement
Advertisement
Table of Contents
Related Manuals for HydroCare Quadmaxx
Summary of Contents for HydroCare Quadmaxx
- Page 1 ® Installation, Use and Care Manual...
- Page 2 The system needs to be mounted to a solid surface (Backing is drilled for 16 inches on center). Wall anchors are provided if needed. You may consider an optional Bypass Assembly with additional shutoff valves for convenience when changing your HydroCare Patented Purification Media.
- Page 3 Unpack the new HydroCare Purification Media. One Media package is provided for each sleeve( Fig 5). Using your fingers, insert the first pad, the gold colored piece into the outlet side of the Sleeve which is the side with the arrow pointing away (See Figure 6).
- Page 4 10. Remove all (8) plastic red caps from the ends of the Sleeves (Shown in Figure 4). They can be discarded. 11. To ensure that both the inside of each elbow and the outside of the Manifolds are properly coated with Silicone Grease, put the Sleeve on the Manifold one end at a time (See Figures 5 &...
- Page 5 You can order your refills at www.hydrocareusa.com. Save 10% on auto refill subscription. Contact : HydroCare USA 888 967 9283 or email info@hydrocareusa.com. Quadmaxx® is tested and certified by WQA to NSF/ANSI 61 for materials safety only. Quadmaxx® assembled in U.S.A...
Need help?
Do you have a question about the Quadmaxx and is the answer not in the manual?
Questions and answers