Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for protech QC1950
- Page 1 Handheld SPECIALIST Thermal Camera User Manual QC1950...
-
Page 2: Product Introduction
PRODUCT INTRODUCTION The product is a handheld thermal infrared camera for temperature laser, illuminating lights and visible light; can be connected to PCs and TF cards, and meets various use requirements. - Page 3 PRECAUTIONS Please always follow the following precautions strictly: 1. Keep the device as stable as possible to prevent shaking violently. 2. Do not use the device at operating temperatures not allowed nor place it in an environment at a storage temperature not allowed.
- Page 4 12. The device is powered by a lithium-ion battery so users must follow the following precautions strictly in order to use it safely: or nearby a high temperature object. water. flush the eyes with clear water immediately and take corresponding medical cares. and follow the charging steps and precautions.
- Page 5 Precautions for use of batteries: 1. The battery can be charged repeatedly. However, the battery is a vulnerable part. If standby time of the device is largely shortened, please replace its battery with an original one provided by the company. 2.
-
Page 6: Chapter 1 List Of Items
CHAPTER 1 LIST OF ITEMS Thermal camera (including battery) -
Page 7: Chapter 2 Product Component Description
CHAPTER 2 PRODUCT COMPONENT DESCRIPTION Laser Infrared lens QC1950 Power Menu Down Tripod mount... -
Page 8: Chapter 3 Basic Operations
CHAPTER 3 BASIC OPERATIONS 3.1 Photo-taking In the real-time observation interface, short press the “Trigger” Key to take a photo, and then press the “ ” key to save the photo or the “ ” key to discard it according to the prompt on the interface. - Page 9 5. When necessary, short press the “ ” key in the photo preview interface to delete a photo. 3.3 File export 2. Connect the USB cable with the computer. 3. Access the disk folder of the computer, select the photo to be exported, copy it to the computer, and view the photo file through the analysis software.
-
Page 10: Chapter 4 Others
CHAPTER 4 OTHERS 4.1 Resetting and formatting SD card 1. Access the Setup Menu-Reset and press the “ ” key to confirm the reset. 2. This function will restore the machine settings to the factory defaults. Please operate carefully. 3. Access the Setup Menu-Formatting SD Card, and press the “ ”... -
Page 11: Chapter 5 Frequently Asked Questions
CHAPTER 5 FREQUENTLY ASKED QUESTIONS Symptom Cause Measures Low battery. Reuse battery after charging. Plug of external power Pull the plug and reinsert it source is not inserted Boot failure in proper place. properly. Battery life expires. Replace with new battery. IR image is Lens have misted up or been Clean lens with specialized... - Page 12 Distributed by: Electus Distribution Pty Ltd 46 Eastern Creek Dr, Eastern Creek NSW 2766 Australia Ph 1300 738 555 Int’l +61 2 8832 3200 Fax 1300 738 500 www.electusdistribution.com.au...
Need help?
Do you have a question about the QC1950 and is the answer not in the manual?
Questions and answers