Net App Installation; Wifi Modem Configuration; Detection Of The First Wifi Modem - ATTACK OT81 Manual

credentials of your WiFi network (that
will be used by the WIFI modem during
its operation)
◦ choosing
smartphones (yours and any other one)
to access the control functions of boiler
and system
2 - then, the Hotspot of the WIFI modem
is disabled and the communication
between the smartphone and ATTACK
Condens APP occurs via WEB and through
your WiFi network.
ATTACK Condens app installation
Install theATTACK Condens app
suitable for your system
(from Google Play or Apple App Store, see
also "APP compatibility" on page 13)
N.B.: During the installation and use, the APP could ask for
acceptance of conditions, and permission to access to
some contents and functions of your device.

WIFI modem configuration

When the WIFI modem is powered for the first
time, it automatically generates its own WiFi
network (Hotspot), that can be found among the
WiFi sources available from the smartphone and
is identified by the name of:
BP_WFC_OEM_APXXXXXX
(where the last 6 digits are the same 6 digits of the
MAC address of the device (without [:]), included
on a label partially visible from the window)
f on your smartphone, with active WiFi, access
Settings > Wireless and networks (or similar,
depending on the system and version)
f search for the name of the Hotspot transmitted
by the WIFI modem and connect your
smartphone to it. No password is required.
The indication "Internet may not be available"
or similar is normal, since it is an internal
network�
f In the case you cannot see the Hotspot name
in the list, try to:
a password to
• move your smartphone closer to the WIFI
modem
• perform a total reset of the WIFI modem
allow (see "WIFI modem total reset" on
page 18)
f Start the ATTACK Sondens app
f If, at this point, you are adding a WIFI modem
on a smartphone which already features other
WIFI modem, go to paragraph "Adding other
WIFI modem" on page 16

Detection of the first WIFI modem

f Since the APP has just been installed and there
is yet no WIFI modem configured, the first
"DEVICES" installation page will open:
NOTE: the indication "HVAC" device (acronym of Heating -
Ventilation - Air Conditioning) in this case refers to
the WIFI modem, since the APP communicates with
the system through the WIFI modem.
15