Do you have a question about the RS 200L and is the answer not in the manual?
Questions and answers
Summary of Contents for Link Controls RS 200L
Page 1
T: +44 (0)1928 579050 F: +44 (0)1928 579259 www.linkcontrols.co.uk enquiries@linkcontrols.co.uk Operating Instructions for Control Panel : Operating Instructions for Control Panel RS 200L Warning : Please read these instructions fully before installation Control Panel / RS 200L / LC-3157 Rev.A...
Page 2
The controls must be disconnected from the electricity supply before carrying out electrical works. It must be ensured that the electricity supply remains disconnected during the works. Local protective regulations must be complied with. Page 2 / 8 – RS 200L / LC-3157 Rev.A...
Page 5
X5 X4 X3 A wrong adjustment of the mains voltage can destroy the control. Factory setting 400V Mains supply PE PE L1 L2 L3 N1 400V 3~/PE 230V 3~/PE Mains switch Page 5 / 8 – RS 200L / LC-3157 Rev.A...
Page 6
If the jumper J1 is in position J1=NC and no sensor is connected, the input must be Sensor NC Sensor NO bridged (+ to IN). pnp open collector pnp open collector Page 6 / 8 – RS 200L / LC-3157 Rev.A...
Page 7
Vertical on the wall , min. height 100 cm 215 mm x 275 m x 190 mm Housing dimensions -10° C … +55°C Ambient temperature -20°C … +85°C Storage temperature Isolation class IP 65 Weight 5,5 Kg Page 7 / 8 – RS 200L / LC-3157 Rev.A...
Need help?
Do you have a question about the RS 200L and is the answer not in the manual?
Questions and answers