Related Manuals for SANO NEO LIFTKAR SAL UNI
Summary of Contents for SANO NEO LIFTKAR SAL UNI
- Page 1 NEO LIFTKAR SAL SAL UNI / SAL ERGO / SAL FOLD / SAL FOLD-L INSTRUCTION MANUAL English...
-
Page 2: Table Of Contents
INTRODUCTION ..................................1 SAFETY GUIDELINES / TECHNICAL DATA ........................1.1 General safety guidelines ............................1.2 Technical data of the LIFTKAR SAL ..........................1.3 Technical data for Lithium quick-change battery pack ....................2 CONTROLS ..................................2.1 Model ERGO ................................2.2 Model UNI .................................. -
Page 3: Introduction
In other words, a professional for professionals! In order to update you about product news as well as technical changes (e.g. options, accessories) we ask you to register your product online. https://www.sano-stairclimbers.com/product-registration 1 SAFETY GUIDELINES / TECHNICAL DATA 1.1 GENERAL SAFETY GUIDELINES... -
Page 4: Technical Data Of The Liftkar Sal
1.2 TECHNICAL DATA OF THE LIFTKAR SAL Valid for all LIFTKAR SAL models Load capacity 110 kg 140 kg 170 kg Maximum climbing speed 48 steps/min 35 steps/min 29 steps/min Maximum step height 220 mm Autonomy (maximum) steps up and down approx. -
Page 5: Controls
2 CONTROLS 2.1 MODEL ERGO 1: Up button - 2: Upper handle - 3: Lower handle - 4: Crossbar - 5: Quick-change battery pack - 6: Swing arm - 7: Main wheels - 8: Shovel - 9: Control unit - 10: Frame - 11: Charging status indicator - 12: Safety flap Individual characteristics of the Liftkar SAL Ergo: Upright posture and maximum control Ideal for beer kegs, stacks of tyres, etc. -
Page 6: Model Uni
2.2 MODEL UNI 1: Up button - 2: Upper handle - 3: Frame - 4: Quick-change battery pack - 5: Swing arm - 6: Main wheels - 7: Shovel - 8: Control unit - 9: Lower handle - 10: Charging status indicator - 11: Safety flap - 12: Climber unit Individual characteristics of the Liftkar SAL Uni: Lightweight multi-purpose stairclimber Water canisters, drinks crates or copier paper... -
Page 7: Model Fold
2.3 MODEL FOLD 1: Up button - 2: Upper handle - 3: Cross tube handle - 4: Frame - 5: Locking lever - 6: Quick-change battery pack - 7: Swing arm - 8: Main wheels - 9: Shovel - 10: Control unit - 11: Charging status indicator - 12: Safety flap - 13: Climber unit Individual characteristics of the Liftkar SAL Fold: Foldable model variant, fits in every trunk... -
Page 8: Model Fold-L
2.4 MODEL FOLD-L 1: Up button - 2: Upper handle - 3: Frame - 4: Locking lever - 5: Lower handle - 6: Quick-change battery pack - 7: Swing arm - 8: Main wheels - 9: Shovel - 10: Cross tube handle - 11: Control unit - 12: Frame - 13: Charging status indicator - 14: Safety flap - 15: Climber unit Individual characteristics of the Liftkar SAL Fold: Foldable model variant with a higher base frame... -
Page 9: The Swivel Joint (Fold / Fold-L)
2.5 THE SWIVEL JOINT (FOLD / FOLD-L) The necessary friction for the rotary joint is obtained through multiple friction disks, which are compressed simultaneously on the left and right sides. The lock must be tightened sufficiently to avoid movement in use. As a rule: The lock will be sufficiently tightened if a single operator can tilt back the load from the upright position without any handle movement. -
Page 10: Charging Status Indicator
2.6.3 BEEP FEATURE This is a people warning feature for transports in public areas. Activating the beeper function: Switch on the stairclimber and press and hold the On/Off button for about 30 seconds until a beep signal sounds. Now, the beep signal remains on while the stairclimber is moving. Deactivating the beeper function: Switch on the stairclimber and press and hold the On/Off... -
Page 11: Ascend Button In Upper Handle
0 ~ 10 % BLINKING 10 ~ 23 % LIGHT BLINKING 23 ~ 35 % LIGHT LIGHT 35 ~ 48 % LIGHT LIGHT BLINKING 48 ~ 60 % LIGHT LIGHT LIGHT 60 ~ 70 % LIGHT LIGHT LIGHT BLINKING 70 ~ 80 % LIGHT LIGHT LIGHT... -
Page 12: Fitting And Removing The Battery
3 FITTING AND REMOVING THE BATTERY 3.1 FITTING THE BATTERY Align the battery pack between the guides on the frame. Gently press the battery pack downwards. The battery pack clicks into place. Your LIFTKAR is ready for use. 3.2 REMOVING THE BATTERY Pull battery safety lever Pull the battery upwards out of the guides. -
Page 13: Operation
4 OPERATION 4.1 ASCENDING STAIRS Insert the battery and press the ON/OFF button until it is constantly green. The LIFTKAR is now in the UP MODE. Pressing the Up button in the upper handle, will operate the support wheels and will lift the LIFTKAR over the step continuing until the button is released. - Page 14 With the support wheels in the descend position the LIFTKAR can be rolled over the step margin and the support wheels will, under controlled conditions, lower the machine onto the next step down. When the main wheels land on the lower step, the support wheels automatically rotate to the descend position for the descent onto the next step down.
-
Page 15: Please Pay Attention To
4.3 PLEASE PAY ATTENTION TO 4.3.1 SHIFT OF BALANCE When ascending the balance of the load changes as soon the support wheels start lifting the load. Operators quickly become accustomed to this and compensate by tilting the handle. Initially, before this operation becomes automatic, care should be taken at the point where the support wheels take the load when ascending. -
Page 16: Charging The Battery
4.3.4 LIFTKAR IS NOT A RUBBER PAD In the beverage industry drums are sometimes directly thrown from the truck onto the hand truck instead of a rubber pad or old tyre. This is not possible with the LIFTKAR when the support wheels are in the descending position. The impact will be transmitted to the connecting bar via the drive unit, which may result in fracture. -
Page 17: Battery Charger
mode as a result, even with light loads. See Operation 4.3.3. Charging time: approx. 4.5 h depending on charge level 5.1 BATTERY CHARGER The battery charger supplied is extremely powerful. An LED display gives a clear indication of charging status. The charge indicator gives you an idea whether the battery pack is fully charged or not. -
Page 18: Accessories And Options
SAFETY GUIDELINES Please note the following: Protect against moisture. Do not pull the plug out of the socket by its cord. Never use the charger unit if it has a damaged cable or plug, replace it immediately. The device should be connected directly to a power supply, never use an extension cord. The device is intended for indoor use only, it should never be exposed to rain. -
Page 19: Disposal
Do not simply dispose of the battery pack in a household dustbin, however. If there are any further questions, please ask your specialist dealer. Sano can organise professional disposal of the whole stairclimber unit, against payment, if required. 8 WARRANTY AND LIABILITY 8.1 WARRANTY... -
Page 20: Liability
8.2 LIABILITY SANO Transportgeraete GmbH as manufacturer is not responsible for the safety of the LIFTKAR SAL if: the LIFTKAR SAL is used other than is intended, repairs, installation or other work have been carried out by unauthorised persons. the instructions in these Operating Instructions are not observed non-original parts are installed or connected with the LIFTKAR SAL original parts are removed. - Page 21 NOTE NEO Liftkar SAL I 21...
- Page 22 NEO Liftkar SAL I 22...
- Page 23 NEO Liftkar SAL I 23...
-
Page 24: Contact
Germany Tel. +49 8033 / 308 96 0 Fax +49 8033 / 308 96 17 info@sano-treppensteiger.de www.sano-treppensteiger.de SANO UK Powered Stairclimbers Ltd. Bristol Court, Betts Avenue Martlesham Heath Ipswich, Suffolk / IP5 3RY, England Tel. +44 1473 / 333 889 Fax +44 1473 / 333 742 info@sano-uk.com...