Crolla ALLY Instructions

ATTACHING THE BASSINET

Before setting up bassinet, make sure all rails have become rigid.
The bassinet must be fully assembled and installed before using
1. Zip up the bassinet and secure 2. Must zip up the bassinet
the zipper head with buckle, completely without crevice
then cover it with flap. before using.
4. Assemble the 5. Place the mattress
connecting tubes into the bassinet.
as picture shown. Place mattress, soft side up

ADJUSTING TO CO-SLEEPING MODE

The travel cot can be fixed to the parent's bed (co-sleeping mode).
1. Slide the adjustor inwards as photo shown
2. Adjust the slide door down
3. Position the travel cot next to the bed
4. Lift up the slide door when parents is not around.
1
3. Slide two tubes in the pocket
as picture shown.
2

Care and Maintenance

1. Your travel cot can be spot cleaned with a sponge and soapy water.
2. Do not use undiluted neutral detergent, gasoline or other organic
solvent to wash the travel cot. It may cause damage to the travel cot.
3. To wash carry bag, machine wash in lukewarm water and drip-dry. Do not use bleach.
4. At the beach or in the garden, clean sand and grit off your travel cot.Sand in the long
rail locks may cause damage.
5. From time to time, check your travel cot for worn parts, torn material or stitching.
Replace or repair the parts as needed.
6. If the travel cot is not in use for a long period of time, please put it in the shade where
your child cannot access it.
5
PRESS TO UNLOCK
PRESS TO UNLOCK
PRESS TO UNLOCK
6 6 1