SWIFTY ONE MK4 Quick Start Manual

HOW TO UNFOLD

Before unpacking your scooter, you must read
the User Manual, observe rider restrictions and
read the returns policy and warranty overleaf.
Take care when unpacking your scooter, please
keep all packaging until you are entirely satisfied
with your purchase.
Follow the steps illustrated below to unfold your scooter and prepare for your
first ride. Some parts may vary from the diagram, however the (un)folding
process remains the same. You will need a pump with a standard 'Schrader'
valve when inflating the tyres.
Please observe our safety recommendations in the User Manual before your
first ride.
Please note, a part of the scooter may have been disassembled by our
packing team in order to fit accessories in the box (e.g. mudguards,
Kick-Stand) you will find the tools required to reassemble these parts
enclosed.
We have prepared video tutorials for you to watch on our YouTube channel.
Go to swiftyscooters.com/assembly-guides to find the direct links to our
videos.
If you have any problems, please contact your local dealer, or contact us:
SwiftyHQ Tel: +44 (0)161 848 8695
Email: support@swiftyscooters.com
6
Hold carry handle and lift
up to rotate wheel through
WARNING! STEPS 6 and 7
POTENTIAL FINGER TRAP - always
keep fingers inside carry handle
when folding and unfolding
1
Turn footplate toggle, and lift folding stem
2
Secure folding
stem lever
with toggle
4mm Allen Key × 1 5mm Allen Key × 1
Folding stem adjuster
Wheel spanner (15mm Standard, 17mm Marine)
7
Pull back pin and release
to lock rear fork into place
3 Release handlebar
quick release
Battery Charger Lezyne Rear Light
8
Lower foot plate
4 Rotate and lower handlebars,
and tighten quick release
WARNING!
Observe MIN.INSERT level markings
for highest handlebar height, make
sure the markings are not visible.
5
Flick in tab on rear fork
to unfold
9
Inflate tyres - you will need a pump with
standard Schrader valve. See tyre for max. PSI.
Recommended tyre pressure 60-80 PSI.
10
Perform a basic safety check before
each ride as described in the User Manual.
Check brakes are working. Check bolts,
wheel nuts and quick release levers are
tightened fully.
You may wish to adjust the position
of the handlebars or brake levers,
using the tool provided.