Office Star Products PROLINE II Operating Instructions

ÉTAPE 1 ÉTAPE 2
5
3
1
6
2
ÉTAPE 4 ÉTAPE 5
10
3
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la
liste et vérifier que les quantités des pièces reçues sont correctes.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu'à ce que vous entendiez
ou sentiez la roulette (2) s'enclencher. Insérer le vérin pneumatique (3) dans la base (1).
ÉTAPE 2 Fixer le dossier (6) au coussin du siège (5) à l'aide de deux vis du dossier (9) pour les trous
arrière du coussin du siège (5). VOIR LE DÉTAIL A. NE PAS SERRER COMPLÈTEMENT LES VIS.
Fixez les trous avant à l'aide de deux vis du dossier (9). VOIR LE DÉTAIL B. SERRER COMPLÈTEMENT
TOUTES LES VIS À L'AIDE DE LA CLÉ ALLEN (13)
ÉTAPE 3 Fixez la plaque du siège (4) au coussin du siège (5) avec la flèche vers l'avant de la chaise avec
quatre vis de plaque du siège (8). SERRER COMPLÈTEMENT LES VIS À L'AIDE DE LA CLÉ
ALLEN (13)
ÉTAPE 4 Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ÉTAPE 5 Fixez les bras (7L et 7R) au coussin du dossier (5) et dossier (6) avec deux bouchones (11) et
deux vis de bras (10) pour chaque bras (7). SERRER COMPLÈTEMENT LES VIS À L'AIDE DE LA CLÉ
ALLEN (13).
IMPORTANTE : Assurez-vous que les bouchons (11) sont dans la bonne position. Les extrémités longues
doivent épouser la forme des coussin du siège (5) et dossier (6) afin de s'asseoir à plat.
ÉTAPE 6 Couvrir les trous dans les bras (7L et 7R) à l'aide de deux bouchons en plastique (12) pour
chaque bras (7).
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR SERRÉ COMPLÈTEMENT
TOUTES LES VIS.
920350C / 920351C
FAUTEUIL DE DIRECTION
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
DÉTAIL A
9
9
5
4
5
DÉTAIL B
6
ÉTAPE 6
6
7L
7R 11
11
10
12
11
5
11
PART
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Roulettes . . . . . . . . . . . . . . . . . . . . . . . .5
3. Vérin pneumatique . . . . . . . . . . . . . . . . .1
4. Plaque du siège . . . . . . . . . . . . . . . . . . .1
5. Coussin du siège . . . . . . . . . . . . . . . . . .1
6. Dossier. . . . . . . . . . . . . . . . . . . . . . . . . .1
7. Bras (7L et 7R) . . . . . . . . . . . . . . . . . . . .2
8. Vis de plaque du siège . . . . . . . . . . . . . .4
9. Vis du dossier . . . . . . . . . . . . . . . . . . . .4
10. Vis de bras . . . . . . . . . . . . . . . . . . . . . .4
11. Bouchon. . . . . . . . . . . . . . . . . . . . . . . .4
12. Bouchon en plastique . . . . . . . . . . . . . .4
13. Clé Allen (non montré). . . . . . . . . . . . . .1
© Office Star Products décembre, 2021
8
2
1
920350C
12
PROLINE II LIMITED WARRANTY
ProLine II chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At it's
option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight on
components still in warranty will be paid by Office Star Products.
QTÉ
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs.
or less. The 54666 is for persons weighing 300 lbs. or less. The 7103M, 7602R, 7605R, 7600R, 81108, 81308 & 81608 are for persons weighing 400 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal Wuse. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. All Pro Line II chairs are built to meet or exceed ANSI BIFMA standards.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by war-
rantywill be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 3:30pm. Pacific Time.
920350C / 920351C
MANAGER'S CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1)
up. To lower seat height sit on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with
an adjustment that will allow the user to change the
tension of the tilting feature. Turn knob (2) clockwise to
increase tension and counter-clockwise to decrease or
ease the tension. To lock return chair to the upright
position and push lever (1) in. To unlock pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
2
1 6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
920351C