Backlight - Medion E66050 Manual

8.4.2. Changing the time format displayed
 Press the Menu button in any playback mode.
 Use the Enter Tune -/+ controller to select the <System> menu and press the
Enter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <Time> menu and press the En-
ter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <Set 12/24 hour> menu and
press the Enter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <Set 12 hour> menu and press
the Enter Tune -/+ controller to confirm your selection.
The time is now displayed in 12-hour format.
 Use the Enter Tune -/+ controller to select the <Set 24 hour> menu and press
the Enter Tune -/+ controller to confirm your selection.
The time is now displayed in 24-hour format.
8.4.3. Changing the date format displayed
 Press the Menu button in any playback mode.
 Use the Enter Tune -/+ controller to select the <System> menu and press the
Enter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <Time> menu and press the En-
ter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <Set Date Format> menu and
press the Enter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <MM/DD/YY> menu and press
the Enter Tune -/+ controller to confirm your selection.
The date is now displayed in the format (month/month/day/day/year).
 Use the Enter Tune -/+ controller to select the <DD/MM/YY> menu and press
the Enter Tune -/+ controller to confirm your selection.
The date is now displayed in the format (day/day/month/month/year).

8.5. Backlight

 Press the Menu button in any playback mode.
 Use the Enter Tune -/+ controller to select the <System> menu and press the
Enter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <Backlight> menu and press the
Enter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <Timeout> menu and press the
Enter Tune -/+ controller to confirm your selection.
Set a time after which the display is to switch off if the device is not used, or deacti-
vate the timeout here.
 Use the Enter Tune -/+ controller to select the required setting and press the En-
ter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <On Level> menu and press the
52