Page 1
REV.7.2022 LTS-03 TWO-TIER ADJUSTABLE ® LAPTOP STAND WITH DESK CLAMPS ® STANDARD TABLETOP TABLE / SHELF EDGE MOUNT PARTITION / LEDGE MOUNT PARTS Scan QR Code to view product details, videos and reviews. part # part name count edge base clamps...
Page 2
- Position the two Width Adjust Rods ( F ) to align with the screw holes of the Right Top Arm ( D ) and Left Top Arm ( G ) the footers and insert. ANY QUESTIONS? VISIT US AT AXCESSABLES.COM...
Page 3
- Secure the Middle Shelf ( L ) by screwing in the - Stick the EVA - Non-Slip Pads ( E ) strategically on the Plastic Screw Knobs ( C ). Right and Left Top Arms. ANY QUESTIONS? VISIT US AT AXCESSABLES.COM...
Page 4
- Align the screw holes to the Left L - Foot ( H ) and Right L - Foot ( B ) bottom screw holes and screw in the M6 Screws with Washers ( I ). bottom screw holes and screw in the M6 Screws with Washers ( I ). ANY QUESTIONS? VISIT US AT AXCESSABLES.COM...
Page 5
- Align the holes of the Left and Right Top Arms to the corresponding holes of the Left and Right L-Footers. - Insert the Width Adjust Rods. 9.25” - Screw in the Plastic Screw Knobs. ANY QUESTIONS? VISIT US AT AXCESSABLES.COM...
Need help?
Do you have a question about the LTS-03 and is the answer not in the manual?
Questions and answers