Related Manuals for Flow-Tek M1 Series
Summary of Contents for Flow-Tek M1 Series
- Page 1 SERIES M1 Severe Service Metal Seated Ball Valves Installation, Operation and Maintenance Manual...
-
Page 2: Table Of Contents
10 . Service Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 © 2020 Flow-Tek, Inc. -
Page 3: Safety Instructions - Definition Of Terms
NOTICE including property damage . © 2020 Flow-Tek, Inc. FLOW-TEK, Inc. Tel: 832.912.2300 8323 N. Eldridge Pkwy. #100 Fax: 832.912.2301... -
Page 4: Bill Of Materials
BODY: Body Material MAX T: Maximum Temperature BALL: Ball Material S/N: Valve Serial Number SEAT: Seat Material P/N: Valve Part Number © 2020 Flow-Tek, Inc. FLOW-TEK, Inc. Tel: 832.912.2300 8323 N. Eldridge Pkwy. #100 Fax: 832.912.2301 Houston, Texas 77041 www.flow-tek.com... -
Page 5: Design
. If there are any questions regarding the best orientation suitable places to attach lifting slings/straps . Never use hand of the valve, contact Flow-Tek . wheels or other protruding parts of the gearbox or actuator not designated for this purpose . -
Page 6: Installation
Larger valves and actuators may need external support to prevent excess piping loads from effecting valve operation . Verify operating position . Refer to Section 6 – Operation for more information . © 2020 Flow-Tek, Inc. FLOW-TEK, Inc. Tel: 832.912.2300 8323 N. Eldridge Pkwy. #100 Fax: 832.912.2301... -
Page 7: Removing Valve From Service
Removing Valve from Service Before the valve is removed from service it should be placed in the open position to prevent internal damage to valve components . © 2020 Flow-Tek, Inc. FLOW-TEK, Inc. Tel: 832.912.2300 8323 N. Eldridge Pkwy. #100 Fax: 832.912.2301... -
Page 8: Operation
. This ensures optimal performance and long valve life . Failure to fully stroke the valve may lead to void of warranty . © 2020 Flow-Tek, Inc. FLOW-TEK, Inc. Tel: 832.912.2300 8323 N. Eldridge Pkwy. #100 Fax: 832.912.2301... -
Page 9: Maintenance
. 10 . Verify that the scribe line on the stem (7) is facing the body/ closure joint . © 2020 Flow-Tek, Inc. FLOW-TEK, Inc. Tel: 832.912.2300 8323 N. Eldridge Pkwy. #100 Fax: 832.912.2301... -
Page 10: Valve Disassembly
. 10. SERVICE CONTACT 8. VALVE DISASSEMBLY Flow-Tek Service may be reached 24 hours per day / 7 days per Your M1 valves have been carefully fitted and assembled for optimum week . performance and long life . It is not recommended that the valves be disassembled without factory supervision or specific instructions provided by the Flow-Tek Service Department .