Advertisement
Quick Links
iTrans DX2-T-22
Dante 2CH Analog
Input Dongle
All Rights Reserved
Version: iTrans DX2-T-22_2022V1.0
Product Introduction
Thanks for choosing the iTrans
DX2-T-22. It connects to your Dante
network and supports Analog 2X0
channels audio, allowing receive
analog audio signal, convert the
analog signal to digital signal and
transmit through Dante network.
Features
Plug and Play
24-bit audio support
2X0 audio channels
Supports 802.3af PoE
Packing List
1x iTrans DX2-T-22
1x User Manual
Note: Please contact your distributor
immediately if any damage or defect in the
components is found.
Panel Description
RJ45: Dante network
1
communication port. Green
steady light indicates system
ready; yellow flashing light
indicates link/data traffic. The
green light will flash to identify
the device when clicking the
Dante Controller "Identify" button
(an eye-shaped symbol) on the
host computer.
XLR: 2 x XLR male, connect
2
input devices
Advertisement
Related Manuals for infobit iTrans DX2-T-22
Summary of Contents for infobit iTrans DX2-T-22
- Page 1 Packing List the device when clicking the Input Dongle Dante Controller “Identify” button 1x iTrans DX2-T-22 (an eye-shaped symbol) on the 1x User Manual host computer. All Rights Reserved XLR: 2 x XLR male, connect...
- Page 2 using Dante Technical Specification Controller) Audio Model Name Analog 2X0 +24 dBu/+4 General Max signal dBu/0 dBu level -5 to +55℃ 0 dBV/-10 dBV Operation (+23° to 20Hz to Temperature Frequency +131°F) 20kHz(-/+0.5dB Response -25 to +70℃ Storage (-13° to 20k Ohm Temperature +158°F)
Need help?
Do you have a question about the iTrans DX2-T-22 and is the answer not in the manual?
Questions and answers