Advertisement
Table of Contents
Table of Contents
IMPORTANT: Please read and understand this manual before any assembly.
Place all parts from the box in a cleared area and position them on the
floor in front of you. Remove all packing materials and place them back
into the box. Do not dispose of the packing materials until assembly is
complete. Read each step carefully before beginning any assembly and
make sure you understand each step.
• Proper placement of your Fire Ring is essential.
• Keep children away during assembly.
• This product contains small parts which can be swallowed by children.
• Keep fingers away from the places where they can be pinched or trapped.
• Do not attempt to assemble the fire ring if any parts are missing.
• Any assembly or maintenance of the product must be carried out by adults only.
• Some parts may contain sharp edges. Please wear protective gloves.
• To prevent damage, place all parts on a level surface during assembly.
Add a layer of protective surface if needed.
• Due to the nature of the product's galvanized steel material and exposure to high heat,
surface oxidation (rusting) will occur and it is normal to see some discoloration after use.
Over time the galvanized steel will darken. Use care when assembling and handling the
product in order to prevent the paint from being scratched.
Needed for Assembly:
Cross-head Screwdriver
3
3
5
6
7
The cross-head screwdriver is not included in the package.
8
9
10
11
Advertisement
