Summary of Contents for Sices CBS03
- Page 1 CBS2000 – ING SIMPLIFIED AUTOMATIC BATTERY CHARGER CBS03 ÷ CBS06 12 Vdc / 24 Vdc - 5/8 A C.B.S. 5/8 A COD. 14341/0058 D 07_Ing...
- Page 2 CBS2000 – ING OPERATION The automatic battery charger is sold in two different executions according to the battery voltage. The device is built from first class components and green LED to inform that, when lighted, the battery charger is operating. BATTERY CHARGER OPERATING TECHNICAL FEATURES Input voltage :...
- Page 3 CBS2000 – ING INSTRUCTION FOR INSTALLATION 1) Connect Mains Voltage to input terminal: (0 - 230 -400 Vac) of battery charger. 2) Connect the "POSITIVE BATTERY" output directly to positive battery terminal. 3) Connect the "NEGATIVE BATTERY" output directly to negative battery terminal. Use cable with minimum 2,5 smmq section.
- Page 4 CBS2000 – ING 3) If the setting is to be changed, adjust the potentiometer which can be reached through the printed circuit perforation, and set correct value.
- Page 5 CBS2000 – ING TROUBLE SHOOTING The battery charger is not re-charging. Remember that green LED is off only Mains is on. Thus check : For relevant voltage on terminals 0-22Vac or 0-30Vac For relevant input voltage on transformer tereminals 0-230V / 400V Check for continuity between battery negative and positiva outputs and the battery itself SETTING FEATURES Element voltage for...
Need help?
Do you have a question about the CBS03 and is the answer not in the manual?
Questions and answers