Page 1
TC101A Thermocouple-Based Temperature Data Logger PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2 Wiring the Data Logger 2 Device Operation 4 Device Maintenance...
Page 2
-40 °C to +80 °C (-40 °F to +176 °F) for the data logger body. Installation Guide The TC101A-ST and TC101A-TB have the ability to shield the thermocouple with the ground connection. When using a Installing the Interface Cable 2-wire thermocouple, leave the ground input unconnected.
Page 3
TC101A PRODUCT USER GUIDE Downloading Data from a Data Logger Trigger Settings 1. Connect the logger to the interface cable. The device can be programmed to only record based off user configured trigger settings. 2. Highlight the data logger in the Connected Devices list.
Page 4
TC101A PRODUCT USER GUIDE NEED HELP? Device Maintenance Recalibration Recalibration is recommended annually. To send devices Battery Replacement back for calibration, visit madgetech.com. Materials: Small Phillips Head Screwdriver and a Replacement Battery (LTC-7PN) 1. Puncture the center of the back label with the screw driver and unscrew the enclosure.